Nutzo – Gladiator Standard Height Series Expedition Truck Bed Rack

$2,299.00

Finish Options

Lighting Package

The Deluxe Light package includes: 1-CHMSL, 1- White cargo bed light, 2- Yellow marker lights, 4- Red marker lights, 2- VisionX Dura M460 2.75” square LED flood or spot light on the rear of the rack. All of our lights are wired with double sheathed marine grade wire and include a 3 foot long cord.

Awning Mount

Aluminum Coiling Cover

USA made aluminum powdercoated, retractable, and lockable cover

Accessory Shelf

The accessory shelf is approximately 15″ wide and bolts onto the rack spanning the bed. This shelf sits behind cab, it is removable and includes tie down holes

NutShell Modular Storage Solution

Our all aluminum storage boxes are fully welded and gasketed.  They offer extreme security and weather resistance.  We have coated the outside of the box with our textured urethane coating and they bolt to most of our previous and future racks.  The boxes have a lockable compression latch (2x on double width boxes) and a gas strut to hold the door open (2x on double width boxes). The Standard box size is 52″ Wide, 14″ Tall, 13″ Deep. 

This must be a number!

This must be a number!

This must be a number!

Rotopax Mounting Plates

These mounting plates are pre drilled for Rotopax Mounts but work great for mounting misc. gear. They are offered in a triple width configuration.

This must be a number!

This must be a number!

This must be a number!

Rotopax

On the Deluxe mounts we supply our own All Weather Composite- Keyed alike locks

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

Maxtrax Traction Aides

Maxtrax/ TRED Pro mounting plates

These plates are pre-drilled to mount to our Tech 1 and Tech 2 racks that have the accessory mounting bars. Plates Do Not come with the Maxtrax or TRED Pro Mounting Pins.

Maxtrax Mounting Pins

Black Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack or bars. The set includes 4 pins which can securely hold 2 or 4 MAXTRAX, 4 stainless steel Nylock nuts and 4 flat stainless steel washers. There’s a hole in the top of each mounting pin for a TSA-style padlock. * Designed for MAXTRAX MKII only. (MAXTRAX NOT INCLUDED).

Maxtrax Storage Box

All aluminum storage box for Maxtrax brand only. These boxes make it easy to slide traction boards in and out. The hinged door has a hole for a carabiner or pad lock. These boxes can be mounted to the underside of the rack or anywhere else you’d like to store your traction boards.

Hi Lift Jack Mount

Aluminum Standoff blocks with a Grade 8 bolt. Includes Stainless washer, lock washer, and wing nut.

Custom options available

We can design and build your custom rack. Please tell us about any additional accessories or modifications that you would like to have on your expedition bed rack

Nutzo Gladiator Standard Mid Height Series Expedition truck bed rack is a fully welded, all aluminum, expedition roof top tent (RTT) rack.  This rack series has been specifically designed to match the lines of the new Jeep Gladiator.  These expedition racks bolt to the truck using factory mounting holes and require no modification to the vehicle. The Standard Height Rack sits 18.75″ above the bed sides.   The Nutzo Gladiator rack has been designed with modularity in mind to get you outfitted for your next adventure. 

Custom options available, please inquire.

Pricing subject to change without notification.

Average Crate fee material/ labor $595

Description

Nutzo Gladiator Standard Mid Height Series Expedition truck bed rack is a fully welded, all aluminum, expedition roof top tent (RTT) rack.  This rack series has been specifically designed to match the lines of the new Jeep Gladiator.  These expedition racks bolt to the truck using factory mounting holes and require no modification to the vehicle. The Standard Height Rack sits 18.75″ above the bed sides.   The Nutzo Gladiator rack has been designed with modularity in mind to get you outfitted for your next adventure.  The Large openings, in the rack, can accommodate either 2 Rotopax, a large Nutshell Storage box, or 2 small Nutshell Storage boxes. The small forward opening on the rack can accommodate a small Nutshell Storage box.   If you desire covered bed storage, we have multiple options available.  We can outfit your bed rack with either an Aluminum coiling cover or a 5″ Expedition Height hard deck.  If a full Expedition Bed Slide is desired, The Expedition Height hard deck will be necessary.

These racks are made from 2” square aluminum tube with 1/8” wall thickness.  The rack comes standard with 5 welded cross bars made from 2” square tube. Removable crossbars are available for an additional charge.  The bed rack is welded to a  1/4” thick aluminum angle that runs the entire length of the bed. Standard black powdercoat finish.

Custom options available, please inquire.

Pricing subject to change without notification.

 

The Nutzo Gladiator Bed Rack Options and Modules:

  • Finish Options – Black powdercoat (standard)
  • Lighting Options – The light package can be purchased as a Deluxe Package ($879.00) or a la carte.  The internally wired Deluxe light package includes: 1-CHMSL, 1-  white cargo bed light, 2- Yellow marker lights, 4- Red marker lights, 2- VisionX Dura M460 2.75” square LED flood light.  All of our lights are wired with 12-16 gauge double sheathed marine grade wire and come standard with 3ft leads.  All of our crimp fittings are heat shrink fittings to keep out moisture.  For disconnects we use Weather Pack electrical connectors and snap connectors.  The weatherproof fused switch panel in the Pelican box is an additional charge.
  • Coiling Cover Option – USA made aluminum powder coated, retractable, and lockable cover.  Coiling Cover is weatherproof.
  • Accessory Shelf – The accessory shelf is approximately 15″ wide and bolts onto the rack spanning the bed. This shelf sits behind cab, it is removable and includes tie down holes.
  • Nutshell Storage Box – Our all aluminum storage boxes are fully welded and gasketed.  They offer extreme security and weather resistance.  We have coated the outside of the box with our textured urethane coating.   The boxes have a lockable compression latch and a gas strut to hold the door open. The Standard box size is 52″ Wide, 14″ Tall, 13″ Deep.
  • Awning Mount Brackets – Our racks have pre-drilled provisions on both sides of the rack to add our bolt on awning mounts. Two different offsets are available according to what clearance is needed for the RTT and awning combination. The brackets are pre-drilled to accept most 270 syle awnings. Custom hole spacing available.
  • Rotopax and gear Mounting Plates – These Mounting plates are made from 1/8″ thick aluminum and are offered in a 52″ Triple width. Each of our plates are pre drilled for mounting Rotopax.
  • Maxtrax Mounting Plates –These plates are pre-drilled to mount to our Tech 1 and Tech 2 racks that have the accessory mounting bars. Plates Do Not come with the Maxtrax or TRED Pro Mounting Pins.
  • Maxtrax Storage Tray –These mounting trays offer quick access to your Maxtrax traction boards.  These Trays are available for 2 or 4 traction boards.  These trays are specifically designed for Maxtrax brand only.  While on the trail you can secure the closer door with a carabiner or a small padlock.

**Many custom options are available and can be built to your wants and needs

**Pricing, options, measurements, materials & design subject to change without notice

** Average Crate fee material/ labor $595

California Prop 65 Warning

 

California Prop 65 Warning

Additional information

Weight 75 lbs
Dimensions 72.5 × 71 × 21 in
Finish

Color Matched Textured Urethane, Raw Aluminum, Standard Black Textured Urethane

Fits

2020 Jeep Gladiator

Lighting

LED, Work Lights, Marker Lights, Third Brake Light, Cargo Lights

Video

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.